Setting up tp link router12/30/2023 ![]() ![]() However, you may need to disable AX Mode if you experience connection issues with older Wi-Fi 5 devices. Use this feature if you have Wi-Fi 6 and newer devices. Or, click Separate 2.4 GHz and 5 GHz to disable band steering and set the network name and password for each radio. Step 6: Create a single network name and password. L2TP: Use this type if you’re connecting to a VPN, and it requires an address, username, and password to use the internet.PPTP: Use this type if you’re connecting to a VPN, and it requires an address, username, and password to use the internet.DHCP: Use this type if your internet service requires no information from you.The DHCP type is selected by default, so don’t change it unless your internet connection requires login info. Step 5: Select your Internet Connection Type. Sometimes we see routers get confused by choosing one port over the other during setup, so if the router doesn’t see your internet connection, move the Ethernet cable to the other WAN port. Many models now have a dedicated 2.5Gbps Ethernet port for WAN or LAN connectivity. ![]() You won’t see this step if you have one WAN port. This mode uses the same network name and password as the parent router. AiMesh: Use this mode if you’re linking a second router to an AiMesh-capable parent router via a wired or wireless connection.Media Bridge: Use this mode if you’re using the router as an external Wi-Fi adapter for multiple wired devices.This mode has a different network name and password than the parent router. Access Point: Use this mode if you are expanding your Wi-Fi range using Ethernet.This mode has the same network name and password as the parent router. Repeater: Use this mode if you are expanding your Wi-Fi range using wireless.Wireless Router: Use this mode if the router connects directly to your modem or ONT.Wireless Router is selected by default, so don’t change this setting unless you’re using the router as a secondary access point. Step 8: Reboot the router to finish the setup. Step 6: Change the router’s login credentials. However, you may need to disable AX Mode later if you experience connection issues with older Wi-Fi 5 devices Use this feature if you have Wi-Fi 6 (and newer) devices. Or, select Separate 2.4 GHz and 5 GHz to disable Smart Connect (band steering), and set the network name and password for each radio. Step 4: Create a single network name and password. This connection requires information supplied by your internet provider, including the subnet mask and default gateway. Static IP: Use this type if you lease an IP address that doesn’t change.PPPoE: Use this type if your internet provider requires a username and password to use the internet.Automatic IP: Use this type if your internet service requires no information from you.Step 3: Let the router auto-detect your connection or select Manual Setting and choose one of the following connection types: If this doesn’t work, enter the IP address printed on the router’s label (usually affixed to the bottom) or on a card in the packaging. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |